home *** CD-ROM | disk | FTP | other *** search
- Subject: Re: Need a Turbocard for am A-1000
- X-Comment-To: (Oliver Helbing)
- Newsgroups: comp.sys.amiga.hardware
- References: <4g9qgo$2hg@ra.ins.de>
- <MSGID_242=3A1000=2F510.35=40fido=5Fde_753FA26C@Fido.DE>
- X-Newsreader: TIN [AMIGA 1.3 950726BETA PL0]
- Path: tharkad.aball.de!news
- From: "Harald Fricke" <fricke@tharkad.aball.de>
- Date: Sun, 25 Feb 1996 11:57:04 MET
- Message-ID: <250296n1157@tharkad.aball.de>
-
- In article <MSGID_242=3A1000=2F510.35=40fido=5Fde_753FA26C@Fido.DE>, Peter Klassmann (Peter_Klassmann@highlands.fido.de) wrote:
- > In a message dated 19 Feb 96 Oliver Helbing wrote:
- >
- > OH> Does anybody know about or sell a cheap accelerator card
- > OH> for an A-1000?
- > There are no accelerator cards for the A1000
- > (except a board with a 68000@14Mhz)
-
- And the Lucas 68020 board project (see Aminet Set 1:hard/hack/a1000hacks.lha).
- There also was a 32 bit-RAM expansion for Lucas called Franches (sp?), but
- I cannot locate info for that any more. Both were build-it-yourself PD hardware
- projects. I remember people said it was somewhat tricky to get Lucas
- running because of a TTL chip causing timing problems.
-
- > But you can use some accelerator cards made for the A500.
- > They must be placed below the original 68000 in your Amiga.
- > _
- Which sits near the drive bay. You might have to cut/remove the brace
- around the drive or even the drive itself to get enough mounting room.
-
- Hope this helps,
-
- Harald
-